# ---------------------------- # pgPool-II configuration file # ---------------------------- # # This file consists of lines of the form: # # name = value # # Whitespace may be used. Comments are introduced with "#" anywhere on a line. # The complete list of parameter names and allowed values can be found in the # pgPool-II documentation. # # This file is read on server startup and when the server receives a SIGHUP # signal. If you edit the file on a running system, you have to SIGHUP the # server for the changes to take effect, or use "pgpool reload". Some # parameters, which are marked below, require a server shutdown and restart to # take effect. # #------------------------------------------------------------------------------ # CONNECTIONS #------------------------------------------------------------------------------ # - pgpool Connection Settings - listen_addresses = '*' # Host name or IP address to listen on: # '*' for all, '' for no TCP/IP connections # (change requires restart) port = 9999 # Port number # (change requires restart) socket_dir = '/tmp' # Unix domain socket path # The Debian package defaults to # /var/run/postgresql # (change requires restart) # - pgpool Communication Manager Connection Settings - pcp_port = 9898 # Port number for pcp # (change requires restart) pcp_socket_dir = '/tmp' # Unix domain socket path for pcp # The Debian package defaults to # /var/run/postgresql # (change requires restart) # - Backend Connection Settings - # Host name or IP address to connect to for backend 0 # Port number for backend 0 # Weight for backend 0 (only in load balancing mode) # Data directory for backend 0 #backend_flag0 = 'ALLOW_TO_FAILOVER' # Controls various backend behavior # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER #backend_flag1 = 'ALLOW_TO_FAILOVER' # - Authentication - enable_pool_hba = off # Use pool_hba.conf for client authentication pool_passwd = 'pool_passwd' # File name of pool_passwd for md5 authentication. # "" disables pool_passwd. # (change requires restart) authentication_timeout = 60 # Delay in seconds to complete client authentication # 0 means no timeout. # - SSL Connections - ssl = off # Enable SSL support # (change requires restart) #ssl_key = './server.key' # Path to the SSL private key file # (change requires restart) #ssl_cert = './server.cert' # Path to the SSL public certificate file # (change requires restart) #ssl_ca_cert = '' # Path to a single PEM format file # containing CA root certificate(s) # (change requires restart) #ssl_ca_cert_dir = '' # Directory containing CA root certificate(s) # (change requires restart) #------------------------------------------------------------------------------ # POOLS #------------------------------------------------------------------------------ # - Pool size - num_init_children = 32 # Number of pools # (change requires restart) max_pool = 4 # Number of connections per pool # (change requires restart) # - Life time - child_life_time = 300 # Pool exits after being idle for this many seconds child_max_connections = 0 # Pool exits after receiving that many connections # 0 means no exit connection_life_time = 0 # Connection to backend closes after being idle for this many seconds # 0 means no close client_idle_limit = 0 # Client is disconnected after being idle for that many seconds # (even inside an explicit transactions!) # 0 means no disconnection #------------------------------------------------------------------------------ # LOGS #------------------------------------------------------------------------------ # - Where to log - log_destination = 'stderr' # Where to log # Valid values are combinations of stderr, # and syslog. Default to stderr. # - What to log - print_timestamp = on # Print timestamp on each line # (change requires restart) log_connections = off # Log connections log_hostname = off # Hostname will be shown in ps status # and in logs if connections are logged log_statement = off # Log all statements log_per_node_statement = off # Log all statements # with node and backend informations log_standby_delay = 'none' # Log standby delay # Valid values are combinations of always, # if_over_threshold, none # - Syslog specific - syslog_facility = 'LOCAL0' # Syslog local facility. Default to LOCAL0 syslog_ident = 'pgpool' # Syslog program identification string # Default to 'pgpool' # - Debug - debug_level = 0 # Debug message verbosity level # 0 means no message, 1 or more mean verbose #------------------------------------------------------------------------------ # FILE LOCATIONS #------------------------------------------------------------------------------ pid_file_name = '/var/run/pgpool/pgpool.pid' # PID file name # (change requires restart) logdir = '/tmp' # Directory of pgPool status file # (change requires restart) #------------------------------------------------------------------------------ # CONNECTION POOLING #------------------------------------------------------------------------------ connection_cache = on # Activate connection pools # (change requires restart) # Semicolon separated list of queries # to be issued at the end of a session # The default is for 8.3 and later reset_query_list = 'ABORT; DISCARD ALL' # The following one is for 8.2 and before #reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT' #------------------------------------------------------------------------------ # REPLICATION MODE #------------------------------------------------------------------------------ replication_mode = on # Activate replication mode # (change requires restart) replicate_select = off # Replicate SELECT statements # when in replication or parallel mode # replicate_select is higher priority than # load_balance_mode. insert_lock = on # Automatically locks a dummy row or a table # with INSERT statements to keep SERIAL data # consistency # Without SERIAL, no lock will be issued lobj_lock_table = '' # When rewriting lo_creat command in # replication mode, specify table name to # lock # - Degenerate handling - replication_stop_on_mismatch = off # On disagreement with the packet kind # sent from backend, degenerate the node # which is most likely "minority" # If off, just force to exit this session failover_if_affected_tuples_mismatch = off # On disagreement with the number of affected # tuples in UPDATE/DELETE queries, then # degenerate the node which is most likely # "minority". # If off, just abort the transaction to # keep the consistency #------------------------------------------------------------------------------ # LOAD BALANCING MODE #------------------------------------------------------------------------------ load_balance_mode = on # Activate load balancing mode # (change requires restart) ignore_leading_white_space = on # Ignore leading white spaces of each query white_function_list = '' # Comma separated list of function names # that don't write to database # Regexp are accepted black_function_list = 'nextval,setval' # Comma separated list of function names # that write to database # Regexp are accepted #------------------------------------------------------------------------------ # MASTER/SLAVE MODE #------------------------------------------------------------------------------ master_slave_mode = off # Activate master/slave mode # (change requires restart) master_slave_sub_mode = 'slony' # Master/slave sub mode # Valid values are combinations slony or # stream. Default is slony. # (change requires restart) # - Streaming - sr_check_period = 0 # Streaming replication check period # Disabled (0) by default sr_check_user = 'nobody' # Streaming replication check user # This is necessary even if you disable # streaming replication delay check with # sr_check_period = 0 sr_check_password = '' # Password for streaming replication check user delay_threshold = 0 # Threshold before not dispatching query to standby node # Unit is in bytes # Disabled (0) by default # - Special commands - follow_master_command = '' # Executes this command after master failover # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character #------------------------------------------------------------------------------ # PARALLEL MODE #------------------------------------------------------------------------------ parallel_mode = off # Activates parallel query mode # (change requires restart) pgpool2_hostname = '' # Set pgpool2 hostname # (change requires restart) # - System DB info - system_db_hostname = 'localhost' # (change requires restart) system_db_port = 5432 # (change requires restart) system_db_dbname = 'pgpool' # (change requires restart) system_db_schema = 'pgpool_catalog' # (change requires restart) system_db_user = 'pgpool' # (change requires restart) system_db_password = '' # (change requires restart) #------------------------------------------------------------------------------ # HEALTH CHECK #------------------------------------------------------------------------------ health_check_period = 10 # Health check period # Disabled (0) by default health_check_timeout = 20 # Health check timeout # 0 means no timeout health_check_user = 'postgres' # Health check user health_check_password = 'postgres' # Password for health check user health_check_max_retries = 0 # Maximum number of times to retry a failed health check before giving up. health_check_retry_delay = 1 # Amount of time to wait (in seconds) between retries. #------------------------------------------------------------------------------ # FAILOVER AND FAILBACK #------------------------------------------------------------------------------ failover_command = '' # Executes this command at failover # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character failback_command = '' # Executes this command at failback. # Special values: # %d = node id # %h = host name # %p = port number # %D = database cluster path # %m = new master node id # %H = hostname of the new master node # %M = old master node id # %P = old primary node id # %r = new master port number # %R = new master database cluster path # %% = '%' character fail_over_on_backend_error = on # Initiates failover when reading/writing to the # backend communication socket fails # If set to off, pgpool will report an # error and disconnect the session. search_primary_node_timeout = 10 # Timeout in seconds to search for the # primary node when a failover occurs. # 0 means no timeout, keep searching # for a primary node forever. #------------------------------------------------------------------------------ # ONLINE RECOVERY #------------------------------------------------------------------------------ recovery_user = 'postgres' # Online recovery user recovery_password = 'postgres' # Online recovery password recovery_1st_stage_command = 'basebackup-replication.sh' # Executes a command in first stage recovery_2nd_stage_command = 'pgpool_recovery_pitr' # Executes a command in second stage recovery_timeout = 90 # Timeout in seconds to wait for the # recovering node's postmaster to start up # 0 means no wait client_idle_limit_in_recovery = 0 # Client is disconnected after being idle # for that many seconds in the second stage # of online recovery # 0 means no disconnection # -1 means immediate disconnection #------------------------------------------------------------------------------ # WATCHDOG #------------------------------------------------------------------------------ # - Enabling - # CHANGED use_watchdog = on # Activates watchdog # (change requires restart) # -Connection to up stream servers - # CHANGED trusted_servers = 'dbc1.my.tld,dbc2.my.tld' # trusted server list which are used # to confirm network connection # (hostA,hostB,hostC,...) # (change requires restart) ping_path = '/bin' # ping command path # (change requires restart) # - Watchdog communication Settings - wd_hostname = 'dbc2.my.tld' # Host name or IP address of this watchdog # (change requires restart) wd_port = 9000 # port number for watchdog service # (change requires restart) wd_authkey = 'secret' # Authentication key for watchdog communication # (change requires restart) # - Virtual IP control Setting - # Trenger vi IP her, eller kan vi bruke maskinnavn? 10.10.10.68 delegate_IP = 'dbc.my.tld' # delegate IP address # If this is empty, virtual IP never bring up. # (change requires restart) #ifconfig_path = '/sbin' #ifconfig_path = '/usr/local/bin' ifconfig_path = '/' # ifconfig command path # (change requires restart) #if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0' #if_up_cmd = 'ip addr add dev eth0 $_IP_$/24' if_up_cmd = '/usr/local/bin/ip-addr.sh add 10.10.10.68/24 FC00:10:10:1::68/64' # startup delegate IP command # (change requires restart) #if_down_cmd = 'ifconfig eth0:0 down' #if_down_cmd = 'ip addr del dev eth0 $_IP_$/24' if_down_cmd = '/usr/local/bin/ip-addr.sh del 10.10.10.68/24 FC00:10:10:1::68/64' # shutdown delegate IP command # (change requires restart) #arping_path = '/usr/sbin' # arping command path arping_path = '/sbin # arping command path' # (change requires restart) arping_cmd = 'arping -U $_IP_$ -w 1' # arping command # (change requires restart) # - Behaivor on escalation Setting - clear_memqcache_on_escalation = on # Clear all the query cache on shared memory # when standby pgpool escalate to active pgpool # (= virtual IP holder). # This should be off if client connects to pgpool # not using virtual IP. # (change requires restart) wd_escalation_command = '' # Executes this command at escalation on new active pgpool. # (change requires restart) # - Lifecheck Setting - # -- common -- wd_lifecheck_method = 'heartbeat' # Method of watchdog lifecheck ('heartbeat' or 'query') # (change requires restart) wd_interval = 10 # lifecheck interval (sec) > 0 # (change requires restart) # -- heartbeat mode -- wd_heartbeat_port = 9694 # Port number for receiving heartbeat signal # (change requires restart) wd_heartbeat_keepalive = 2 # Interval time of sending heartbeat signal (sec) # (change requires restart) wd_heartbeat_deadtime = 30 # Deadtime interval for heartbeat signal (sec) # (change requires restart) # Host name or IP address of destination 0 # for sending heartbeat signal. # (change requires restart) # Port number of destination 0 for sending # heartbeat signal. Usually this is the # same as wd_heartbeat_port. # (change requires restart) # Name of NIC device (such like 'eth0') # used for sending/receiving heartbeat # signal to/from destination 0. # This works only when this is not empty # and pgpool has root privilege. # (change requires restart) #heartbeat_destination1 = 'host0_ip2' #heartbeat_destination_port1 = 9694 #heartbeat_device1 = '' # -- query mode -- wd_life_point = 3 # lifecheck retry times # (change requires restart) wd_lifecheck_query = 'SELECT 1' # lifecheck query to pgpool from watchdog # (change requires restart) wd_lifecheck_dbname = 'template1' # Database name connected for lifecheck # (change requires restart) wd_lifecheck_user = 'nobody' # watchdog user monitoring pgpools in lifecheck # (change requires restart) wd_lifecheck_password = '' # Password for watchdog user in lifecheck # (change requires restart) # - Other pgpool Connection Settings - other_pgpool_hostname0 = 'dbc1.my.tld' # Host name or IP address to connect to for other pgpool 0 # (change requires restart) other_pgpool_port0 = 5432 # Port number for othet pgpool 0 # (change requires restart) other_wd_port0 = 9000 # Port number for othet watchdog 0 # (change requires restart) #other_pgpool_hostname1 = 'host1' #other_pgpool_port1 = 5432 #other_wd_port1 = 9000 #------------------------------------------------------------------------------ # OTHERS #------------------------------------------------------------------------------ relcache_expire = 0 # Life time of relation cache in seconds. # 0 means no cache expiration(the default). # The relation cache is used for cache the # query result against PostgreSQL system # catalog to obtain various information # including table structures or if it's a # temporary table or not. The cache is # maintained in a pgpool child local memory # and being kept as long as it survives. # If someone modify the table by using # ALTER TABLE or some such, the relcache is # not consistent anymore. # For this purpose, cache_expiration # controls the life time of the cache. relcache_size = 256 # Number of relation cache # entry. If you see frequently: # "pool_search_relcache: cache replacement happend" # in the pgpool log, you might want to increate this number. check_temp_table = on # If on, enable temporary table check in SELECT statements. # This initiates queries against system catalog of primary/master # thus increases load of master. # If you are absolutely sure that your system never uses temporary tables # and you want to save access to primary/master, you could turn this off. # Default is on. #------------------------------------------------------------------------------ # ON MEMORY QUERY MEMORY CACHE #------------------------------------------------------------------------------ memory_cache_enabled = off # If on, use the memory cache functionality, off by default memqcache_method = 'shmem' # Cache storage method. either 'shmem'(shared memory) or # 'memcached'. 'shmem' by default # (change requires restart) memqcache_memcached_host = 'localhost' # Memcached host name or IP address. Mandatory if # memqcache_method = 'memcached'. # Defaults to localhost. # (change requires restart) memqcache_memcached_port = 11211 # Memcached port number. Mondatory if memqcache_method = 'memcached'. # Defaults to 11211. # (change requires restart) memqcache_total_size = 67108864 # Total memory size in bytes for storing memory cache. # Mandatory if memqcache_method = 'shmem'. # Defaults to 64MB. # (change requires restart) memqcache_max_num_cache = 1000000 # Total number of cache entries. Mandatory # if memqcache_method = 'shmem'. # Each cache entry consumes 48 bytes on shared memory. # Defaults to 1,000,000(45.8MB). # (change requires restart) memqcache_expire = 0 # Memory cache entry life time specified in seconds. # 0 means infinite life time. 0 by default. # (change requires restart) memqcache_auto_cache_invalidation = on # If on, invalidation of query cache is triggered by corresponding # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered # by memqcache_expire. on by default. # (change requires restart) memqcache_maxcache = 409600 # Maximum SELECT result size in bytes. # Must be smaller than memqcache_cache_block_size. Defaults to 400KB. # (change requires restart) memqcache_cache_block_size = 1048576 # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'. # Defaults to 1MB. # (change requires restart) memqcache_oiddir = '/var/log/pgpool/oiddir' # Temporary work directory to record table oids # (change requires restart) white_memqcache_table_list = '' # Comma separated list of table names to memcache # that don't write to database # Regexp are accepted black_memqcache_table_list = '' # Comma separated list of table names not to memcache # that don't write to database # Regexp are accepted ssl_key = '' ssl_cert = '' ssl_ca_cert = '' ssl_ca_cert_dir = '' backend_hostname0 = 'dbc1.my.tld' backend_port0 = 5432 backend_weight0 = 1 backend_data_directory0 = '/var/lib/pgsql/data' backend_flag0= 'ALLOW_TO_FAILOVER' backend_hostname1 = 'dbc2.my.tld' backend_port1 = 5432 backend_weight1 = 1 backend_data_directory1 = '/var/lib/pgsql/data' backend_flag1= 'ALLOW_TO_FAILOVER' other_pgpool_hostname0 = 'dbc1.my.tld' other_pgpool_port0 = 9999 other_wd_port0 = 9000 heartbeat_destination0 = 'dbc1.my.tld' heartbeat_destination_port0 = 9694 heartbeat_device0 = ''